OmniTurn GT-75 Specifications

GENERAL SPECIFICATIONS:
 
Travel in X:12"
Travel in Z:9"
Tooling Height:1/2" (2" optional)
Tooling Plate Size:Gang type (quick change)
Repeatability of Slide Travel:.00005" (50 millionths)
Resolution of Slide Travel:.00005" (50 millionths)
Accuracy of Slide Travel:.0001" (one tenth)
CNC Control:OmniTurn PC Based
Rapid Travel:300ipm
Feed Rate:.00005ipr to 300ipm
Threading:240tpi to unlimited (useful for long-lead multi-start)
Thrust:500lb continuous; 750lb intermittent
Axis Motors:Closed Loop Servo with velocity feedback
Acceleration:.04sec 0 to 300ipm
CONSTRUCTION: 
Linear Ways:Precision Linear Guides
Ball Screws:Precision ground, Zero Backlash
Base Billet:MJ7 Composite Casting
Headstock:Cast Iron
Frame Finish:Heavy Duty Powder Coat
Coolant Pump:1/2" (2" optional)
SPINDLE: 
Cartridge Type:Class 7 Angular Contact
Spindle Taper, ID:5C, .000025" TIR
Spindle Taper, OD:4 Cam Lock
Collet Actuator:Pneumatic
SPINDLE DRIVE, STANDARD: 
Spindle RPM:100 - 4000rpm (5000 rpm optional)
Power:5hp
RPM Programmable:RPM and Constant Surface Feed
SPINDLE DRIVE, C-AXIS: 
Spindle RPM:0 - 4000rpm (5000rpm optional)
Power:5hp
RPM Programmable:RPM, CSF, C (abs), C (incr), C/X, C/Z, C/X/Z
Spindle Positioning Resolution:.02
REQUIREMENTS: 
Electrical:208 - 240 VAC 1 or 3 phase 20A
Air:Compressed Air 3.0 cfm @ 60 - 100 psi
Floor Space:34" x 66 " (75" high)
Machine Weight:1650lbs

[Back to GT-75] [GT-75 Prices]