5hp OmniTurn GT-75. including: flood coolant, pneumatic collet closer, solid-state hard
drive, 220V 1 or 3 phase, 9" Z axis travel, extended X axis travel (12")
(Part Number 410-00-000) |
Call for factory-direct price |
C-Axis OmniTurn GT-75. including: flood coolant, pneumatic collet closer, solid-state hard
drive, 220V 1 or 3 phase, 9" Z axis travel, extended X axis travel (12")
(Part Number 470-00-000) |
Call for factory-direct price |
4 degree spindle nose option (Part Number 693-39-001) |
NoCharge |
½" center height option (Part Number 692-19-001) |
NoCharge |
2" center height option (Part Number 692-19-011) |
$750 |
3/8" center height option (Part Number 692-19-012) |
$100 |
Short cycle spindle drive option for C axis drive |
$500 |
Foredom live tool including: 220V single
phase 1/4hp motor - 20,000 rpm max, spindle, drive shaft, speed
controller, 1/8"" & 1/4"" collet,
lubricant for spindle bearings. - Requires
M function outlet, 220V single phase |
$550 |
Suhner live tool - light duty - Minifix
drive, NA7 cable, BEWI-4 spindle |
$1,735 |
Suhner live tool includes motor - 1,020 to
14,400 rpm in 7 steps via gear box., spindle - uses ER16 collets -
10mm max, drive shaft. 1.36hp, 220V 3 phase. - Requires
M function outlet, 220V three phase |
$2,575 |
M function controlled outlet: 220V three
phase |
$395 |
M function controlled outlet: Pneumatic with
FRL |
$395 |
M function controlled outlet for NSK Astro-E |
$395 |
Lag bolt kit for OmniTurn GT-75 and GT-Jr |
$110 |
TripleAir pneumatic bar feed - 12' x
1-1/16" |
$3,490 |
OmniTurn 3" - 2 jaw chuck,
.25"" diameter stroke, blind, max 5000 rpm. |
$2,295 |
OmniTurn 4" - 3 jaw chuck, .25" dia.
stroke, blind, 5,000# holding force. |
$2,495 |
OmniTurn 4.5" - 3 jaw chuck,
.17"" dia. stroke, 1" through hole, 4000# holding
force. |
$3,295 |
Through the spindle coolant, M function
controlled |
$950 |
Through the spindle air blast, M function
controlled |
$750 |
Part Conveyor - installed at factory.
Price includes M-function controlled outlet (M25/M26). |
$1,995 |
Pneumatic tail stock |
$1,995 |
Additional I/O package, 8 in/6 out,
programmable from Control |
$795 |
* Startup by OmniTurn Tech. - Travel and
expenses billed at cost |
$750 |